A Full cover block for reference design GeForce 590 GTX graphic card.
High performance water block for GeForce 590 GTX reference graphic cards. Please check our www.coolingconfigurator.com online compatibility system to see if your card is compatible.
Base is made of nickel plated electrolytic copper. New cooling engine involves thin fins cut into copper, providing extreme cooling performance and excellent flow over both GPUs.
Top is made of quality cast acrylic material. The sealing is preformed by quality rubber washers withstanding temperature range from 0 up to +80 degrees Celsius. Block is mounted with enclosed M3x8mm DIN7985 screws.
Fittings can be used on both side of the block (up and down) and 2 plugs are enclosed!
The new EK EN (Electroless Nickel Plating) Series of blocks are more resistant to corrosion and feature:
-Outstanding resistance to corrosion.
-Dimensionally uniform thickness to within 2 millionths of a millimeter.
-Highly adhesive and solderable.
-Very smooth and wear resistant.
-Hardness equal to hard chrome and greater than electrolytic nickel
Electroless nickel plating (EN) is an auto-catalytic chemical technique used to deposit a layer of nickel alloy on a solid workpiece, such as metal or plastic. The process relies on the presence of a reducing agent, which reacts with the metal ions to deposit metal. Due to increased corrosion resistance, the surface of nickel plating is not as shiny as standard Nickel Electroplating and has little darker tone. Throughout the years EN plating may become less bright.
Fittings are NOT included and are optional below!
Features:
Featuring a unique, modern look copper design High performance VGA water block for Nvidia 590 GTX reference design series graphic cards.
EK FC series water blocks cover all chips on graphic cards that require cooling if overclocked.
An extreme high flow path design and unique increased cooling surface over GPU keeps all your graphic cards components cool even at highest graphical loads and over clock.
Blocks base is made of 99,99% electrolytic copper.
High quality CNC manufacturing.
Leak tested to 2 bar pressure (30psi).
Safe, noob-proof mounting system with Standoffs
Real high flow internal design gives minimum flow restriction which allows lowest possible temperatures, not only at VGA water block, but also in the entire water-cooling system.
Cools GPU, VREG, I/O CHIPs and MEMORY modules.
Multiple barb/fitting position allows 4 different fitting configurations.
Allows maximum flexibility for water cooling system setup also in SLI.
Reduces temperatures up to 50°C or more at maximum load.
Much cooler components, allow maximum possible overclocking
Specifications:
Dimensions of copper base:
253 x 119x 5,1mm
Dimensions of acrylic top:
255 x 120 x 10mm
Threads:
4 x G 1/4
Fittings:
optional, not enclose
Included:
1 × Water block
2 × EK-Plug G 1/4
2 × EK-G 1/4 Spacer with o-ring
Mounting mechanism with 18 × POM Acetal standoffs
Thermal pads
Allen key
