The Thermalright Venomous-X is finally ready after 18 months in development and compatible with sockets 775, 1156, and 1366. The Venomous X was designed with the future in mind and future compatibility with the Core i9 processors have already been accounted for. This is possible due to the installation hardware which allows adjustment of pressure via the "Pressure Vault Bracket." Adjustments can be made from 40-80 lbs of pressure to fit any CPU IHS for the best possible CPU contact.
The Venomous X inherited the 6mm sintered heat pipe design, with soldered contact points with the fins and heatsink base to ensure effective heat transfer to our fin array. Thermalright engineers also increased the fin gap distance by 20% to 1.9mm. This modified fin array incorporating our arrowed bent winglet design, allows air to rapidly pass through the heatsink with minimal resistance. Consequently, low or high RPM fans will exhibit excellent performance.
The Venomous-X features a Nickel coated based with a mirror finish to ensure long term usage and maximum performance. The base of the Venomous-X is also slightly convex. This design has been proven to increase performance of the heatsink by drawing away heat from the center of the CPU at an accelerated rate.
Features:
All new patented multiple support pressure vault bracket system that allows users to add pressure to the bracket system (40~70 lbs.), and have a more efficient and secure mounting for socket 1366 / 1156 / 775.
Mirrored copper base for maximum performance
Special bent winglet design allows hot air to pass through the heatsink more rapidly.
Heatsink are all nickel plated to ensure the best quality and performance.
Soldered heat pipes, copper base and fins to ensure the best thermal efficiency.
Six sintered heat pipe design and nickel plated heat pipes.
Includes 2 sets of 120 x 25mm fan clips, Chill factor II thermal paste and all mounting hardware required to install for socket 775, 1156, and 1366 (see picture above).
Convex copper base design, to ensure the Highest thermal conducting thermal efficiency between the CPU and the heatsink.
Heatsink Dimensions:
Size:
Length 127mm x Width 63mm x Height 160mm
Weight:
755 g (excluding fan and bracket system)
Heat pipe:
6mm sintered heat pipe x 6 units
Copper base: C1100 pure nickel plated copper base, with
ultra-shine mirrored surface.
